Creating A Custom Guitar Body : Sunburst Designs

     The Sunburst design is a traditional guitar finish that has been used for years and years. If you're picking up your own guitar body that is unfinished, this is a finish you can apply with minimal effort. It just takes a bit of time and patience! Materials Nitrocellulose Lacquer - Limited colors can be found in a home improvement store. You'll need a base color, as well as a darker color for your outer layer, and clear coat. Masking Tape An Unfinished Guitar Body Time - Lacquer can take a good while to dry, so you'll need quite a bit of time. Process Prepare your work surface. You're going to be using aerosol lacquers,...

Read More

Squier Guitar Mods : Modding Guitar Bodies

For the casual guitar hobbyist or player, replacing and re-wiring the electronics into  guitar bodies is complete overkill, and requires some knowledge of electronics and soldering. Generally, it's much easier to just simply buy  pre-wired guitar bodies, and to install that. Guitar bodies are in no way cheap either. In fact, it wouldn't be strange for them to be more expensive than your original Squier. Unless you've bought an expensive guitar with nice electronics, moving to a more expensive body might be pointless. Squiers and other budget guitars are known for having good quality wood, but cheap electronics. Buying a new body along...

Read More